Avenyora reflection
BepiColombo’s Mercury Arrival Has More Than One Date
BepiColombo is scheduled to enter Mercury orbit on November 21. The two orbiters separate in December, and routine science is planned for April. Here’s how to follow each milestone.

BepiColombo is scheduled to enter orbit around Mercury on November 21, 2026, with its two science orbiters still joined. The European Space Agency (ESA) uses December 2026 as the arrival date in its general mission overview. The detailed schedule places the release of Japan’s Mio orbiter on December 9–10. If you’re following the BepiColombo Mercury arrival, look for the action attached to each date. Orbital capture, separation, and the start of routine science are separate milestones. These dates reflect the agencies’ published plans as of November 19.
What is scheduled for November 21?
ESA’s Mercury Planetary Orbiter (MPO) and the Japan Aerospace Exploration Agency’s Mercury Magnetospheric Orbiter, known as Mio, are travelling together. On November 21, the combined spacecraft is scheduled to enter a polar orbit around Mercury. A polar orbit carries a spacecraft over or near a planet’s poles. At this point the two instrument platforms are still physically joined, so an update confirming capture would describe one combined spacecraft in orbit.
Orbit insertion changes the spacecraft’s trajectory from an approach to a path that stays around the planet. During a flyby, a spacecraft can pass some of the same terrain, take measurements, and continue away. At capture, the aim is to remain bound to Mercury. The ESA arrival update page is the place to follow what the operations team confirms during this transition. A dated entry in the plan tells you when the team intends to reach a milestone. A mission status update tells you what it has actually established.
Why does ESA also say December?
The ESA mission overview gives the broad arrival milestone as December 2026. The detailed ESA schedule breaks that period down. In the plan for December 9–10, MPO releases Mio into the elliptical polar orbit assigned to the Japanese spacecraft. By that stage the two orbiters would be flying independently around Mercury. The schedule then calls for the release of Mio’s sunshield on December 16 and for MPO to lower its own orbit over the following months.
If two articles use different months, compare the events they describe before comparing the dates. November is about the capture of the joined spacecraft. December is about the transition to operating two spacecraft independently. Our guide to the dates of the Mars–Jupiter conjunction shows another case where a single event label can hide several different milestones. For BepiColombo, the difference is in the sequence of spacecraft operations.
How the flight prepared the orbiters for capture
A spacecraft leaving Earth starts out moving around the Sun with Earth. Travelling inward and reaching Mercury’s neighborhood is only one part of the problem. The spacecraft also needs the right velocity relative to Mercury to stay around it. As a spacecraft falls inward toward the Sun, solar gravity affects its speed. The mission design uses a combination of spacecraft propulsion and planetary encounters to make the final approach practical with the propellant the mission carries. ESA’s explanation of the route to Mercury describes the challenge in terms of matching the destination’s orbit.
BepiColombo’s cruise included nine planetary flybys, one at Earth, two at Venus, and six at Mercury. During that long journey, the Mercury Transfer Module provided electrical propulsion. Its thrusters used power from solar panels to accelerate xenon ions. Over long stretches, this produced small changes in velocity that added up. ESA ended that part of the mission before the September separation of the transfer module. MPO’s chemical thrusters then took over the changes needed for the final approach. ESA’s account of the propulsion handover explains when each system was used. The earlier Mercury flybys belong to the journey and prepared the trajectory for the November operation.
What changes once the orbiters fly separately?
MPO will carry out observations of Mercury’s surface, composition, and interior. Mio’s instruments are designed to investigate the planet’s magnetic environment and its interaction with the solar wind, the flow of particles from the Sun. The two orbiters are meant to give scientists measurements from different positions around the same planet. If a magnetic measurement changes, readings taken elsewhere can help researchers work out whether the spacecraft moved through a different region or the environment itself changed over time. The JAXA mission and instrument overview explains the measurements assigned to each orbiter.
The position of each instrument matters when scientists interpret an observation. The same general idea applies when you read a sky chart from Earth. Our guide to geocentric and topocentric positions shows how choosing a different viewpoint changes the coordinates you see. For BepiColombo, the different vantage points are part of the observing plan.
Which updates matter after the first orbit?
Use the verb in the update to identify the milestone. A report that the spacecraft was captured describes entry into Mercury orbit. A report that Mio was released marks the deployment of the Japanese orbiter. A report that MPO reached its planned orbit marks a later change for the European orbiter. The ESA science operations calendar lists March 10, 2027, for MPO to reach its target science orbit and April 6 for its nominal mission to begin. Later steps depend on earlier operations and the dates can move.
Once the orbiters are in their intended orbits, instrument and spacecraft checks help prepare them for routine observations. When you see an orbital period in an update, it tells you how long one trip around Mercury takes for that spacecraft. The planet’s own rotation is a separate interval. Our guide to sidereal and solar days illustrates why choosing the event and reference point matters when you read a period.
A report can also describe several stages of the same operation. A status that a maneuver has begun is evidence that the team has reached that step. The statement that the spacecraft is in the intended orbit is a separate judgment based on tracking. For example, if an update confirms capture and lists Mio’s release as the next milestone, record the capture date and keep the December dates under planned operations. If the release date later changes, the new date applies to the deployment. The first orbit entry would still have its own record. This distinction makes a timeline useful even as the mission is unfolding.
Frequently Asked Questions
When is BepiColombo scheduled to enter Mercury orbit?
ESA gives November 21, 2026, as the planned date for entry into a polar orbit, with MPO and Mio still joined. Mission updates from ESA will report the outcome of the planned operation.
Why is December also called the arrival date?
December is when the plan calls for MPO to deploy Mio. The detailed timeline gives December 9–10, 2026, for this milestone. The general mission overview uses December for the broader arrival.
Will either BepiColombo spacecraft land on Mercury?
Both spacecraft are orbiters. MPO is designed to study Mercury and its surroundings from orbit, and Mio is designed to study the magnetic environment. The November operation aims to capture the joined spacecraft into orbit.
When will BepiColombo start routine science?
ESA’s operations calendar lists April 6, 2027, for the start of MPO’s nominal mission, after orbit adjustments and commissioning. Check the mission’s latest updates when following dates that are still scheduled.